glove with grey finish- FallTech WeldTech 7039, Nomex/Kevlar Blend Full Body Harness, 3 D-Rings

SIZE UniFit X Large 2X Large
Qty:

FallTech WeldTech 7039, Nomex/Kevlar Blend Full Body Harness, 3 D-Rings

A full body harness you can trust when welding at heights. The webbing of this harness is manufactured from an OSHA and ANSI approved Nomex/Kevlar blend that exhibit flame and char resistant properties. The 7039 features 3 alloy steel D-rings and alloy steel buckles and adjusters. Those are expected features you bet your life on when welding up high. 

Features

  • Flame and char-resistant Nomex®/Kevlar® blend webbing
  • Twin torso keepers for stowing idle lanyard connectors
  • Paired friction roller adjusters on front torso
  • Label covers
  • Load impact indicators

This harness allow for adjustment at 5 points on the harness.

  • 1 Adjuster across the chest to allow a better lateral fit
  • 2 Adjusters at the midsection to allow a snug shoulder to leg fit
  • 2 Quick connect buckle and adjustments around the thighs.

Material Specifications

  • Webbing: Nomex/Kevlar blend; Min. 5,000 lbs. tensile strength
  • D‐Rings: Alloy Steel; Min. 5,000 lbs. tensile strength
  • Buckles/Adjusters: Alloy Steel; Min. 3,375 lbs. tensile strength
Performance Specifications
  • Tensile Strength: Min. 5,000 lbs.
  • Max. Capacity: 425 lbs. 

Relevant Standards

  • OSHA: CFR1926.502, CFR1910.66
  • ANSI: A10.32‐2004, Z359.1‐2007, Z359.12‐2009

Warnings

  • Read, understand and follow all labels and instructions prior to use.
  • Inspect before each use.
  • Remove from service if there is evidence of damage or excessive wear.
  • Never attach a Shock Absorbing Lanyard to the front or side D‐Rings.